PLA RepRap PT - 1.75mm 500g - Glow in the dark Green EUA

PLA is the most widely used plastic filament material in FDM 3D printing, due to its low melting point, high strength, low thermal expansion, and good layer adhesion, although it possesses poor heat resistance unless annealed.

PLA RepRap PT - 1.75mm 500g - Glow in the dark Green EUA(matt or glossy). This filament could be more matte at 190º-195º and more glossy at 215º in some printers such as the Prusa.

Information about colour:

Glow in the dark Green EUA that glows in the dark in green, to glow in the dark it needs to absorb light first, and the place must be quite dark. It can be placed next to a lamp and after turning off the light, you will be able to observe the event! The intensity of the luminescence depends on the base color.

Note:There are two versions of Glow in the Dark, although this is a less intense version, the print on the other hand has a greenish tone.

PLA Features:

• PLA or polylactic acid is a material originating from renewable natural sources that contains starch or sugar, such as corn, wheat, sugar cane, beetroot or potato;

• The easiest for 3d printing;

• Generally the first filament which we start the 3d printings;

• Ideal for interior designs or prototypes;

• Good adhesion between layers;

• Not recommended for parts that will be exposed to temperatures up 70ºC.

Printing temperatures and suggestions:

• nozzle: 190º - 215º

• bed: 0º - 60º (60º)

• Fan: 100%

• 4 to 5 top layers

For Printer maintenance:

After printing with other materials and in case of changing the filament to PLA, we suggest that you preheat the printer to the PETG or ABS temperature and then insert the PLA filament. This process prevents clogging in any transition of filament types.

Manufacturer: Reprap.pt

The spool may differ from the one shown in the image due to the reel take-back campaign.